ANAFI
56
Gimbal/camera calibration: before (Android)
Tap “–“ or “+” until the artificial horizon of ANAFI matches the horizon reference
facing the drone. Do not worry about vertical lines: as you can see from the
screenshots, they do not appear straight or parallel on the calibration screen.
Gimbal/camera calibration: after (Android)
When you have straightened the tilt of the camera, tap the “<” icon on the top left of
the screen to confirm your setting and exit camera calibration.
Camera Calibration: Gimbal calibration
Use this option to perform a gimbal calibration, similar to that which occurs after ANAFI is
powered on.
To Next Page
Loading...
Need help?
General
