Parsun F115 - Overview; Identification Mark; Selection of Propeller

1
Overview
Identification mark
The serial number is printed on a label which is pasted on the port side of the clamp bracket
or the upper part of the rotary bracket. The serial number is recorded in the blank of the label to help
you order spare parts from dealers or for your reference in case the engine is stolen.
1. Position of the serial number
The numbers are expressed as follows:
发动机顺序号
SN
生产代号
Selection of propeller
The performance of the outboard motor is seriously affected by the propeller. Improper
selection will have adverse effects on the motor. When the ship runs in full load, the motor will
operate at low speed for a long time. At this time, the propeller with smaller pitch should be selected,
whereas the propeller with larger pitch should be selected to maintain the normal operation of the
engine.
When the engine is running at full throttle, the most suitable propeller for the ship is to refer
to the engine speed and fuel performance, which can provide the highest performance.
Propeller dimensions Material
3-14"×11" Aluminum alloy
3-13
"
8
5
×13"
Aluminum alloy
3-13
"
8
5
×14"
Aluminum alloy
3-13
"
2
1
×15"
Aluminum alloy
3-13
"
4
1
×17"
Aluminum alloy
3-13"×19" Aluminum alloy
3-12
"
8
5
×21"
Aluminum alloy
3-13"×23" Aluminum alloy
3-13"×25" Aluminum alloy
3-13
"
2
1
×14"
Stainless steel
1