PAX S300 - Page 111

S300_V1.00.00 User Manual
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 111
2.
From the Operation
Settings menu, press [1]
for Buzzer Setup.
2.Operation Mode
3.Halo Setup
Operation Settings
1.Buzzer Setup
3.
Press the number
corresponding with your
selection.
(If you select [1],go to
#4,Or you select [2],go to
#5)
Buzzer Setup
1.Key Tone
2.Swipe Tone
4.
Default setting is ON.
Press [1] to disable the
buzzer.
OR
Press [2] to enable the
buzzer.
Key Tone
1.OFF
2.ON