PAX S300 - Set Batch Time

S300_V1.00.00 User Manual
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 99
5.3.3 Set Batch Time
Note
This function sets the specific time the terminal prints a batch report and
clears its memory for the next day. Set Batch Time is for Host Based
Auto Batch EDC types only. The Host is not contacted during this
process. Please note the batched transactions are cleared from
memory with the first transaction of the new batch.
Example: The AutoBatch report is printing in the middle of the day. I
accessed the Set Batch Time function and changed the time. Now the
report prints after we have closed for the day.
STEP
ACTION
DISPLAY
1.
From the Main menu press
[1] for Merchant Settings.
2.Operation Settings
5. Communication
3. Host Settings
Main Menu
1.Merchant Settings
4. System Settings
2.
From the Merchant
Settings menu, press [3] to
set the batch time.
2.Security Settings
4.Additional Prompts
Merchant Params
1.Authorizations
3.Set Batch Time