PAX S300 - Gift Add Value

S300_V1.00.00 User Manual
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 66
4.4.4 Gift Add Value
Note
Use the Add Value function to add credit to the available balance of an
active Gift Card.
Example: X is member of Y’s shop. X finds that his gift card account
need to add some money. So he goes to Y’s shop and asks Y to add
value to his gift card. X gives money and the gift card to Y. Y takes the
gift card and does Gift Add Value on S300 POS terminal and ECR.
 X-Gift card holder; Y-Merchant of shop
STEP
ACTION
DISPLAY
1.
Be sure the terminal is at the Idle Prompt
2.
ECR sends message about the EDC Type and Transaction Type to POS.
The EDC Type is “GIFT” and the Transaction Type is “ADD”. If ECR
(Simulator) sends Transaction Type (00), it means the order of Transaction
Type is not available, press on the screen to select “ADD” on S300.
Notice: If needed, message including Transaction Type, Amount, Tip,
Account, Clerk/Server ID can be input through ECR.
2.1
Swipe the Card, or manually enter the Account Number.
3.
If the security for Card
Manually Entry is on, the
terminal will prompt for
the manager password.
When prompted, enter
the password and then
press [ENTER].
GIFT ADD
********
Please Enter Password