PAX S300 User Manual

S300_V1.00.00 User Manual
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 88
5.3.2.1 User Password
Note
This function allows you to set a user specified password. The POS
Terminal POS terminal password defaults to the current date
(MMDDYYYY). This password changes daily.
It is advised that this default password be changed upon receipt of
the terminal. The new password should be a series of one to
sixteen non-sequential numbers that can be easily remembered.
Using birthdays or anniversaries is not advised as unauthorized
persons can easily discover these passwords.
If the new User Password is forgotten, download the Parameters to
re-establish the default password.
STEP
ACTION
DISPLAY
1.
From the Main menu
press [1] for Merchant
Settings.
2.Operation Settings
5. Communication
3. Host Settings
Main Menu
1.Merchant Settings
4. System Settings
2.
From the Merchant
Settings menu press [2]
for Security Settings.
2.Security Settings
4.Additional Prompts
Merchant Params
1.Authorizations
3.Set Batch Time

PAX S300 Specifications

General

Processor	32-bit ARM11
Security	PCI PTS 3.x approved
Card Readers	Magnetic Stripe, Contactless
Connectivity	RS232, USB, Ethernet
Memory	128MB Flash, 64MB SDRAM