PAX S300 - Gift Issue

S300_V1.00.00 User Manual
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 64
4.4.3 Gift Issue
Note
Use the Issue function to issue a gift card.
Example: X is member of Y’s shop. Y will issue a gift card to X. Y
does Gift Issue transaction on S300 and then give the issued card to X.
 X-Gift card holder; Y-Merchant of shop
STEP
ACTION
DISPLAY
1.
Be sure the terminal is at the Idle Prompt
2.
ECR sends message about the EDC Type and Transaction Type to POS.
The EDC Type is “GIFT” and the Transaction Type is “ISSUE”. If ECR
(Simulator) sends Transaction Type (00), it means the order of Transaction
Type is not available, press on the screen to select “ISSUE” on S300.
Notice: If needed, message including Transaction Type, Amount, Tip,
Account, Clerk/Server ID can be input through ECR.
2.1
Swipe the Card, or manually enter the Account Number.
3.
If the security for Card
Manually Entry is on, the
terminal will prompt for
the manager password.
When prompted, enter
the password and then
press [ENTER].
GIFT ISSUE
********
Please Enter Password