PAX S300 - Page 177

S300_V1.00.00 User Manual
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 177
4.
Press [3] to select the
entry.
1.LAN Type 2.IP Address
3.Subnet Mask
LAN Params
4.Gateway IP
5.DNS IP
5.
If DHCP is enabled, IP
can be viewed but not
edited. For static IP type,
Enter the address then
press [ENTER].
255.255.255.0
Subnet Mask:
6.
Stop