PAX S300 - Page 27

S300_V1.00.00 User Manual
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 27
5.
This is a feature of the
Table Mode.
When prompted, enter
the table number then
press [ENTER]. (It can be
input on ECR)
CREDIT AUTH
▋
Please Enter Table Number :
6.
This is a feature of the
Guest No. Mode.
When prompted, enter
the number of guests then
press [ENTER]. (It can be
input on ECR)
CREDIT AUTH
▋
Please Enter Number of Guests
7.
If the account number was manually entered, the terminal will ask if the card
is present. Depending on the user’s response the terminal will prompt for
V-code and other AVS settings.
* Dependent upon Fraud Control settings.
8.
The terminal contacts the Host Processor for an approval and delivers the
message to ECR, ECR will print the receipt.
If the POS terminal failed to deliver the message to ECR, POS terminal will
generate a reversal automatically before next transaction.
9.
POS terminal will go back to the idle screen.
10.
Stop.