Appendix
pco.edge User Manual V1.03 © PCO AG, Germany
59
A7 Water Cooling Option pco.aquamatic II
This is the re-cooling unit for pco.edge cameras with water-cooling.
System Components
The operation of the pco.aquamatic is simple and uncomplicated. Normally
no maintenance and nearly no attention are needed. Only the liquid level of
the reservoir (tank) should be controlled from time to time.
Only use Innovatec Protect IP for the pco.aquamatic! Do not use or add
any other cooling liquid or water! If you need to add cooling liquid in order
to maintain level in the tank, please contact PCO for additional supply.
The cooling liquid will turn yellow after some hours of operation. This is
normal and no sign of malfunction. The optimum pH-value is between 8 and
9 (please check this value if you are concerned about the cooling liquid
quality).
To Next Page
Loading...
Need help?
General
