Appendix
62
pco.edge User Manual V1.03 © PCO AG, Germany
Dimensions
All dimensions are given in millimeter.
Weight: 4kg (completely filled cooler liquid tank)
General Information
You are not restriced to purchase the pco.aquamatic system. A separate
power supply will be provided to every pco.edge camera with water
connectors in case you want to use an own water cooling solution. The
hardware of pco.edge cameras with USB 3.0 Interface is designed to work
with or without a water cooling system since a fan to provide proper heat
transfer is inside the camera anyways. Please note, that the minimum
sensor temperature of the pco.edge GOLD series is depending on the
cooling system.
In case you use an own water cooling system, please make sure that the
liquid you use to cool your camera is NEVER below the dew point of the
ambient temperature at all times! In order to avoid any appearance of
condensation, use a cooling liquid at room temperature. A liquid flow rate of
1 – 2 litres per minute is sufficient.
To Next Page
Loading...
Need help?
General
