To Next Page

To Previous Page

Appendix

pco.edge User Manual V1.03 © PCO AG, Germany

It is mandatory that 'PCIe is Highspeed Capable' is shown. Otherwise the

board is probably not able to transfer the necessary data rate.

The transfer rates as shown should be displayed.

If you have a board, which is not member of the following list and the above

test did run with success (Highspeed capable!), please report it to PCO

and/or Silicon software.

 Supermicro X8ST3

 GigaByte GA-X58A-UD3R

 Intel S5520

 Intel DX58SO2

 Intel DX79SI

 EVGA X79

 Supermicro X8DTH-iF

Questions and Answers:

Need help?

Do you have a question about the Pco edge and is the answer not in the manual?

Pco edge Specifications

General