Installing Drivers for 6000 Boards
the screen.
Mouse
Emulation –
Select this mode and
mouse functions as
normal and allows
dragging of icons.
Click on Touch – Select this mode and
mouse only provides a
click function, and
dragging is disabled.
Click on
Release –
Select this mode and
mouse only provides a
click function when the
touch is released.
Beep Sound Enable Beep
Sound –
turns beep function on
and off.
Beep on Pen
Down –
beep occurs when pen
comes down.
Beep on Pen Up – beep occurs when pen
is lifted up.
Beep on both – beep occurs when
comes down and is
lifted up.
Beep Frequency – modifies sound
frequency.
Beep Duration – modifies sound
duration.
Cursor Stabilizer
Enable the function support to prevent cursor
shake.
Use press and hold
as right click
You can set the time out and area for you need
Edge Compensation
This page is the edge compensation settings for the advanced calibration.
You can adjust the settings from 0 to 30 for accommodating the difference
of each touch panel.
To Next Page
Loading...
