Chapter 3 Installing Drivers for 6000 Boards
29
Plot Calibration Data
Check this function to have touch panel
linearity comparison graph appear when you
finish Advanced Calibration. The black lines
reflect the ideal linearity assumed by
PenMount’s application program while the blue
lines show the approximate linearity calculated
by PenMount’s application program as the
result of user’s execution of Advance
Calibration.
Turn off EEPROM
storage
This function disables the write-in of calibration
data in
Controller. This function is enabled by default.
Setting
Operation Mode
This mode enables and disables mouse’s ability
of dragging on-screen icons—useful for
configuring POS terminals.
Pen Input
Emulation –
Select this mode and
mouse will emulate
Windows Vista pen input
device operation, by
which no mouse event
will be sent until the
touch is dragged out of
range or released from
To Next Page
Loading...
