Chapter 1 Product Overview
1-3
1. Wireless receiver: Pull out the wireless receiver from the Wireless Pen
hardware. Connect the wireless receiver to the USB port of your com-
puter, and the Wireless Pen will connect with your computer wirelessly.
2. Left button:
Handwriting Mode: When press the left button, the system will replace
the recognized character with the next candidate character. Press again,
replace to the next candidate character and so on.
Presenter Mode: In the Presenter mode, the left button acts as the page
up function to show the previous page.
3. Right button:
Handwriting Mode: It provides 7 Frequently Used punctuation
symbols such as ，。、：；？！. When press the right button, the
system will input the rst symbol. Press it again to replace with the next
symbol and so on.
Presenter Mode: In the Presenter mode, the right button acts as the
page down function to show the next page.
4. Laser point button: Press the laser point button to highlight the main
points in your presentation with the red laser light.
5. LCD monitor: Press the timer setting button (See item 11) after 5 sec-
onds, the LCD monitor will display the left time and alarm you at 2, 5
minutes left and time is up with the gentle red ash. This monitor also
displays the current mode information. [P] represetns Presenter Mode
and [H] represents Handwriting Mode.
6. Writing/Mouse area:
Handwriting Mode: Writing in this area.
Presenter Mode: When pull the stylus out, you can use this area as a
mouse pad.
7. Laser light: When press the laser point button (See item 4), it will turn
To Next Page
Loading...