Pentair EasyTouch 4 User Manual

60
EasyTouch Control System User’s Guide
egasseMr o r r EesuaCe l b i ssoPnoi tuloS
niaMehtnosyalpsiD(r rE r iA
)neercS
de t cennoct onr osnesr i A
hcuoTysaEeh to t
.draobrehto m
12Jo tde t cennocs igu l pr osnesr i aeh t t ah tk cehC
rosnesehttahtkcehC.draobrehtomehtnorotcennoc
.ylrep orpdetcen nocsi er iw
nisyalpsiD(rrEerutarepmeTr iA
)unem "sc i tsongaiD"eht
de t cennoct onr osnesr i A
hcuoTysaEeh to t
.draobrehto m
12Jo tde t cennocs igu l pr osnesr i aeh t t ah tk cehC
.draobrehto mehtnorotcennoc
sya l ps iD(r rEe ru t arepmeTre t aW
)unem "sc i tsongaiD"ehtni
tonrosnesretaW
eh to tde t cennoc
.draobrehto mhcuoTysaE
12Jo tde t cennocs igu l pr osnesr e t aweh t t ah tk cehC
.draobrehto mehtnorotcennoc
sya l ps iD(r rEe ru t arepmeTra l oS
)unem "sc i tsongaiD"ehtni
tonrosnesraloS
eh to tde t cennoc
.draobrehto mhcuoTysaE
12Jo tde t cennocs igu l pr osnesr a l oseh t t ah tk cehC
.draobrehto mehtnorotcennoc
Self Test Error Codes
The “Self Test” feature is intended for use by service personnel. If after performing a control panel self test
(see page 56) there were no errors detected, Code 0 is displayed, indicating that there were no problems and
the test was successful. If a problem is detected during the test, an error code is displayed upon completion of
the test. For example Code 3 would indicate a problem with the LEDs on the control panel. If multiple errors
are detected, multiple code numbers are displayed. For example, Codes 4, 2, 1, would indicate problems
detected with the buttons, LEDs, and the LCD backlight on the control panel.
The following lists the control panel self test error codes.
Error Code Table
EasyTouch Error Messages
Error Messages
If the system detects that a sensor is not connected to the EasyTouch load center or it is defective, an error
message is displayed in the “Diagnostics” menu. The following lists the sensor errors.
edoCr o r r Enoi tpi rcseD
0e d oCsahl enapl o r t nocehT-SSAP
sme l b o r po n
1e d oCthg i l k cabDCL
2e d oCtsa r t nocDCL
3e d oCsDE L
4e d oC)sno t t ub (hc t iwS
5e d oCtse tkcabpoo lTRAU
6e d oCtse tsev l aV / ya l eR/ r osneS

Pentair EasyTouch 4 Specifications

General

Brand	Pentair
Model	EasyTouch 4
Category	Control Systems
Language	English