6
EasyTouch Control System User’s Guide
SpaCommand Spa-Side Remote
The optional 10-button SpaCommand spa-side remote can
control ten pool/spa functions from the spa location. The spa
temperature can be adjusted from the SpaCommand. The
SpaCommand spa-side remote also supports IntelliFlo®
pump speed and flow control. The remote is a double-
insulated device for use with EasyTouch®, IntelliTouch®
and Compool® (CPxxxx) pool and spa control systems. See
page 49 for details.
QuickTouch
®
II Wireless Remote
The optional hand held QuickTouch II wireless remote can control up to four
pool/spa circuits. Each of the four functions on the remote has an on and an
off button. For more information, see page 51.
iS10 Spa-Side Remote Controller
The optional iS10 Spa-Side remote controller is listed UL (1563)
for use with the EasyTouch systems at the water’s edge. Five in-
line buttons control up to ten (10) system functions numbered one
through five from left to right. The iS10 includes an LED display
shows the current spa water temperature. The spa temperature
may be increased or decreased by pressing the up or down arrow
button located under the display. When the Spa mode is switched
OFF, the temperature set at the EasyTouch control panel will resume
the next time the spa mode is activated (see “Man Heat” on page
52). The Spa Mode will automatically turn off after 24 hours. For
iS10 setup and configuration information, see page 49.
SpaCommand Spa-Side Remote (P/N 521245)
The optional IntelliChem
™
water chemistry controller is a pH and ORP
sensing device that dispenses correct amount of chlorine or bromine,
muriatic acid or CO2 gas. IntelliChem provides continual analysis of
your swimming pool water sanitation and pH levels, providing real-time
status information to dispense the proper amount of muriatic acid (pH
reducer) and chlorine or bromine for the correct sanitization and pH
balance. IntelliChem operates with or without a salt chlorine generator
to provide a self-replenishing supply of chlorine generated from salt.
IntelliChem can also connect to carbon dioxide (CO2) liquid gas tanks
to lower pH in your swimming pool water. See page 38 for details.
IntelliChem Water Chemistry Controller
QuickTouch II Wireless Remote (P/N 521245)
IntelliChem Controller (P/N 521245)
iS10 Spa Side Remote
(P/N 520149) (Optional)
To Next Page
Loading...
Need help?
General
