Pentair FLECK 2850 SXT - Page 50

Installer manual Fleck 2850 SXT - Programming
50 / 104 Ref. MKT-IM-030 / C - 12.05.2020
Regeneration cycles:
• B1: First backwash (for dF2b regeneration flow);
• B2: Second backwash (for dF2b regeneration flow);
• BD: Brine draw;
• BF: Brine fill;
• BW: Backwash;
• RR: Rapid rinse.
4. Data display .
5. PM indicator • Appears if controller set in US unit.
6. Flow indicator • Flashes when outlet flow is detected.
7. x1000 indicator • Appears when the displayed number is bigger than 9999.
8. Programming
icon
• Appears in programming modes.