15
Getting Started
1
Inserting / Removing the SD Memory
Card / MultiMediaCard
You can use an SD Memory Card and MultiMediaCard with this
camera. Captured images are recorded on the SD Memory Card /
MultiMediaCard if a card is inserted, or in the Bult-in memory if no card
is inserted. Make sure you turn off the camera before inserting or
removing the SD Memory Card / MultiMediaCard.
1 Slide the card cover in the direction, and flip open.
2 Turn so the label side (with 2 symbol) of the SD
Memory Card / MultiMediaCard is facing toward the
LCD monitor and push in until it clicks.
3 Close the card cover.
1 Slide the card cover in the direction, and flip open.
2
Push the SD Memory Card / MultiMediaCard in the
direction of the arrow.
The card will pop out slightly.
3 Pull the card out to remove.
4 Close the card cover.
Inserting
Removing
Removing
To Next Page
Loading...
Need help?
General
