49
Taking Pictures
4
You can select the Sensitivity to suit the brightness of the surroundings.
1 Select [Sensitivity] on the [A Rec. Mode] menu.
2 Use the four-way controller (45)
to change the sensitivity.
3 Press the OK button.
The camera is ready to take the picture.
A B F D
Setting the Sensitivity
Auto The camera makes the adjustment automatically.
100
• The lower the sensitivity (smaller number), the sharper and more
noise-reduced the image. Shutter speed will be slower in low light
conditions.
• The higher the sensitivity (larger number), the faster the shutter speed
in low light conditions. The image will have more noise.
200
400
The only available AUTO settings are 100 and 200.
Saving the Sensitivity 1 p.68
MENU OK
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Auto
1536
2048
AWB
Wide
Exit OK
Rec. Mode
Sensitivity
1
3
2
MENU OK
15362048Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Wide
Exit OK
Rec. Mode
Sensitivity Auto
AWB
To Next Page
Loading...
