Pentax Optio 33LF - Selecting the Video Output Format; Changing the Start-Up; Shutdown Screen

92
Settings
6
You can select the output format (NTSC or PAL) for capturing or playing
back images on a TV monitor.
1 Select [Video Out] on the [B Set-up] menu.
2 Use the four-way controller (45) to select [NTSC] or
[PAL], to match your TV output format.
3 Press the OK button.
The camera is ready for capture or playback.
You can select the start-up screen displayed when the camera power is
turned on and the shutdown screen displayed when the camera power
is turned off.
1 Select [Screen Setting] in the [B Set-up] menu.
2 Press the four-way controller (5).
3 Press the four-way controller (2345) to select the
image to be used as the start-up / shutdown screen
display.
4 Press the OK button twice.
The camera is ready for capture or playback.
Selecting the Video Output Format
Changing the Start-up / Shutdown Screen
MENU OK
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Auto
1536
2048
AWB
Wide
Exit OK
Rec. Mode
Sensitivity
MENU OK
Language/
Format
Beep
Date Adjust
World Time
English
mm / dd / yy
Exit OK
Set-up
Screen effect
MENU button
How to recall the [B Set-up] menu
Four-way controller
OK button