Pentax Optio 33LF - Setting the Video Output Format; Setting the Date and Time

22
Getting Started
1
You can choose the output format (NTSC or PAL) for taking or
playing back pictures using a TV monitor.
1 Use the four-way controller (45)
to select the video output format.
The default setting is NTSC.
2 Press the OK button.
The screen for setting the Date and Time will
be displayed.
Set the current date and time, and the display style.
1 Use the four-way controller (23) to
select the date and time display style.
2 Press the four-way controller (5).
23 are displayed above and below [24H].
3 Use the four-way controller (23) to
select 24H (24-hour display) or 12H
(12-hour display).
AM or PM is displayed in front of the hour when 12H (12-hour display)
is selected.
Setting the Video Output Format
• You can change the setting after it has been made. Refer to
“Selecting the Video Output Format” (p.92).
Setting the Date and Time
MENU OK
Language/
NTSC
NYC
English
City
DST
Video Out
Initial Settings
Exit Ok
MENU OK
01 / 01 /2003
00:00
Exit Ok
Date Adjust
Date Style
mm / dd / yy 24H
MENU OK
Exit Ok
Date Adjust
01 / 01 /2003
00:00
Date Style
mm / dd / yy 24H