60
Taking Pictures
4
Using the provided software (ACDSee for PENTAX), you can join
multiple images and easily create panoramic photos. Use Panorama
Assist mode to combine images taken so that edges overlap to create a
single panoramic photo.
1 Press the four-way controller (23) in Capture mode.
The virtual mode dial appears.
2 Use the four-way controller (23) to select [Panorama
Assist (F)].
3 Press the OK button.
4 Use the four-way controller to choose
the joining direction.
4 Joins the images at the left.
5 Joins the images at the right.
2 Joins the images at the top.
3 Joins the images at the bottom.
The explanation below will assume that 5 is
selected.
5 Take the first picture.
Press the shutter release button to take the first
image. The right edge of the image is displayed in
transparent form at the left of the LCD monitor.
Taking Panorama Pictures (Panorama Assist Mode)
5, 6
3, 7
1, 2, 4
Set
shift direction
Set
shift direction
OK
To Next Page
Loading...
Need help?
General
