3
Shooting
44
Proceed to Step 5 if you do not need to change the parameters.
3 Press J.
The fine-tuning screen appears.
Available operations
4 Press E.
The screen of Step 2 reappears.
5 Press E.
The camera returns to standby mode.
tMemo
• You can set the white balance for when the flash discharges
in [6. WB When Using Flash] of the E1 menu.
Measure the white balance of a location.
1 Select o in Step 2 on p.43 and press B.
2 Use CD to select o1 to
o3.
3 Under the light you wish to measure the white
balance of, select a white area as the subject,
and press the shutter release button fully.
Adjust the white balance as necessary.
[The operation could not be completed correctly] appears
when measuring is unsuccessful. Press E to remeasure
the white balance.
4 Press E.
The camera returns to standby mode.
tMemo
• You can copy the white balance settings of a captured image
and save it as o1 to o3 in [Save as Manual WB] of the
playback mode palette. (p.50)
White Balance
Color Temperature
g Auto
Approx. 4,000 to
8,000K
h Daylight Approx. 5,200K
i Shade Approx. 8,000K
j Cloudy Approx. 6,000K
k
q
Fluorescent - Daylight Color
r
Fluorescent - Daylight White
s Fluorescent - Cool White
t Fluorescent - Warm White
Approx. 6,500K
Approx. 5,000K
Approx. 4,200K
Approx. 3,000K
l Tungsten Approx. 2,850K
m Flash Approx. 5,400K
n
Color Temperature Enhancement
–
o Manual 1 to 3 –
AB Adjust: Green-Magenta
CD Adjust: Blue-Amber
M Resets the adjustment value to the default
setting.
Cancel
±
0
G3
A2
OK
OK
MENU
Adjusting the White Balance Manually
Manual White Balance
Cancel
Adjust
WB
±
OK
OK
MENU
SHUTTER
To Next Page
Loading...
