Pentax Q7 - Page 63

4
Playback
61
4 Select the parameter
setting method and press
E.
5 Use AB to select the parameter to change, and
use CD to change the value.
For Image Capture Settings,
press D and use AB to select
an item.
For White Balance, Custom
Image and Digital Filter, press D
to display the setting screen.
6 Press E.
The save confirmation screen appears.
7 Select [Save as] and press E.
When [Develop a single image] is selected, select
[Continue] or [Exit] and press E.
uCaution
• Only RAW images captured with this camera can be
developed.
tMemo
• When [Develop multiple images] or [Develop images in
folder] is selected in Step 2, a “xxxR_JPG” folder with a new
number is created, and the JPEG images are stored in the
new folder.
• With the provided software “SILKYPIX Developer Studio 3.0
LE”, you can develop RAW files on a computer,
Develop
images as shot
Allows you to change Image Capture
Settings only.
Develop
images with
modified
settings
Allows you to change Image Capture
Settings, White Balance, Custom Image,
Digital Filter, Sensitivity, High-ISO NR,
Shadow Correction, and Distortion
Correction.
OK
OK
OK
MENU
Develo p imag es as s hot
Develop images as shot
Develo p imag es with
Develop images with
modifi ed set tings
modified settings
Image Captur e Setti ngs
Image Capture Settings
OK
MENU
100-0001
100-0001