PePLink Balance Series v4.0 User Manual
C.3 Bypassing the Firewall to Access Hosts on LAN
C.3.1 Scenario
There are times when remote access to computers on the LAN is desirable; for example,
when hosting web sites, online businesses and FTP download and upload areas, etc.
In such cases, it may be appropriate to create an inbound NAT mapping for the network to
allow some hosts on the LAN to be accessible from outside of the firewall.
C.3.2 Solution
Web Administration Interface can be used for adding an inbound NAT mapping to a host and
to bind the host to the WAN connections, via Network > NAT Mappings > Add NAT Rule
For example, the following settings add the host, with IP address 192.168.1.102, to an
Inbound Mapping and bind the host to the default IP and 12.23.34.3 of WAN1:
To Next Page
Loading...
