peplink Balance 30 - 13.3 Definition of Porting Forwarding

PePLink Balance Series v4.0 User Manual
Page 62
13.3 Definition of Porting Forwarding
(This section applies only to PePLink Balance 30.)
Inbound Port Forwarding rules are defined at:
Network > Inbound Access > Port Forwarding:
To define a new service, click the Add Service button, upon which the following appears:
Port Forwarding Settings
Enable
This setting specifies whether the Inbound Service takes effect.
With an Enable value of Yes, the inbound service takes effect: traffic
is matched, and actions are taken, by PePLink Balance based on the
other parameters of the rule.
With an Enable value of No, the inbound service does not take effect:
PePLink Balance disregards the other parameters of the rule.
Service Name
This setting identifies the service to the System Administrator.
Valid values for this setting consist only of alphanumeric and the
underscore “_” characters.