peplink Balance 30 - 16.7 Reporting Server

PePLink Balance Series v4.0 User Manual
Page 87
SNMPv3 User Settings
User Name
This setting specifies a user name to be used in SNMPv3.
Authentication
Protocol
This setting specifies via a drop-down menu the one of the following
valid authentication protocols:
 NONE
 MD5
 SHA
Authentication
Password
This setting specifies the authentication password, and is applicable
only if the MD5 or SHA authentication protocol is selected.
Privacy Protocol
This setting specifies via a drop-down menu the one of the following
valid privacy protocols:
 NONE
 DES
Privacy
Password
This setting specifies the privacy password, and is applicable only if the
DES privacy protocol is selected.
16.7 Reporting Server
The Reporting functionality enables PePLink Balance to post traffic data and other
information periodically to a PePLink’s Reporting Server for generating detailed historical
usage reports of the device.
The settings for configuring Reporting Server functionality are found at the following
location: System > Reporting Server:
Remote Reporting Settings
Post Data to
Server
This setting specifies whether or not PePLink Balance should
periodically and automatically post traffic data to reporting server.
Reporting
Server
This setting specifies the Internet IP address or hostname of the
reporting server.
By default, the Reporting Server value is report.peplink.com.