peplink Balance 30 - Appendix E. Product Specifications; E.1 PePLink Balance 200

PePLink Balance Series v4.0 User Manual
Page 107
Appendix E. Product Specifications
E.1 PePLink Balance 200
Routing
 NAT, Drop-in and IP Forwarding
 Configurable Static Routes
WAN Support
 DHCP, PPPoE, GRE, and Static IP
 Inbound and Outbound Link Load Balance
Device Management
 Wizard & Menu Driven Web-based Administration Interface over HTML SSL
 Remote Reporting and Management
 Configurations Upload and Download
Internet Access Sharing
 SUA (Single User Account) / Multi-to-Multi NAT
 NAT supports PAT (Port Address Translation)
Security
 Compatible with IPSec and PPTP VPN
 Rules-based Stateful Firewall, with IP Address, Protocol and Port filtering
 NAT Mapping / One-to-One mapping
Physical Interface
 Two RJ-45 for an IEEE 802.3u 10/100M WAN
 Four RJ-45 for an IEEE 802.3u 10/100M LAN
 RS-232 Console / Serial (modem / TA) Port
Power Specification
 AV Input 100-240V, DC Output 9V
Operating Environment
 Kensington Lock Interface
 Temperature: 0°C - 50°C
 Humidity: 10% - 90% (non-condensing)