PePLink Balance Series v4.0 User Manual
This setting specifies the password for the dynamic DNS service.
This setting specifies a list of hostnames to be associated with the
public Internet IP address of the WAN connection.
In order to use dynamic DNS services, appropriate hostname registration(s), as well as a
valid account with a supported dynamic DNS service provider are required.
Due to the policy of dynamic DNS service providers, the dynamic DNS host may be
expired automatically because it has not been updated for a period. In order to prevent
this expiration, PePLink Balance will perform a force update every 23 days if a WAN’s IP
address did not changed.
10.7 WAN Health Check
To ensure traffic is only routed to health WAN connections only, PePLink Balance provides
the functionality to periodically check the health of each WAN connection.
The Health Check settings for each WAN connection can be independently configured via
Network > Interfaces > WAN Setup:
This setting specifies the health check method for the WAN connection.
The value of Method can be configured as Disabled, Ping or DNS
Lookup. The default method is DNS Lookup.
When Disabled is chosen in the Method field, the WAN connection will always be
considered “up”. The connection will not be treated as down in the event of IP routing
errors.
To Next Page
Loading...
