PePLink Balance Series v4.0 User Manual
Under HA mode, Dynamic DNS is not supported. During a fail-over or fail-back, the
active PePLink Balance does not perform Dynamic DNS updates. As a result, the resolved
addresses may not be the IP address of the active PePLink Balance unit.
15.2 Traffic Prioritization
PePLink Balance provides the functionality to prioritize Voice over IP, VPN, video streaming,
Secure Web over the other Internet traffic.
The settings for configuring Quality of Service are located at the following location:
Network > Misc. Settings > Traffic Prioritization:
Please note that the PePLink Balance prioritizes only outbound packets. E.g. for secure web
prioritization, the system will prioritize uploading traffic for outgoing connections and
downloading traffic for incoming connections.
16 System Settings
16.1 Admin Security
For security reasons, after logging in to the administration interface at the first time,
changing the administrator password is recommended.
Configuring the administration interface to be accessible only from the LAN can further
improve system security.
Administrative Settings configuration is located at System > Admin Security:
To Next Page
Loading...
