peplink Balance 30 - 17 Status; 17.1 Device

PePLink Balance Series v4.0 User Manual
Page 93
17 Status
The information section displays the information of PePLink Balance on the device, link
usage, active sessions, DHCP clients and log.
17.1 Device
System information is located at Status > Device:
System Information
System Time
This shows the current system time.
Serial Number
This shows the serial number of the PePLink Balance unit.
Current
Firmware
Version
This shows the firmware version on which the PePLink Balance unit is
currently running.
The second table shows the MAC address of each Ethernet interface.