peplink Balance 30 - 10 Configuration of WAN Interface(s); 10.1 DHCP Connection

PePLink Balance Series v4.0 User Manual
Page 30
10 Configuration of WAN Interface(s)
The WAN interface settings are located in Network > Interfaces > WAN.
There are four possible connection methods:
 DHCP
 Static IP
 PPPoE
 GRE
The connection method and details are determined by, and can be obtained from, the ISP.
10.1 DHCP Connection
The DHCP connection method is suitable if the ISP provides an IP address automatically by
DHCP (e.g. Cable, Metro Ethernet, etc.).