PePLink Balance Series v4.0 User Manual
7 Basic Configuration
7.1 Connecting to Web Administration Interface
1. Start a web browser on a computer connected through LAN with PePLink Balance.
2. To connect to Web Administration Interface of PePLink Balance, enter the following
LAN IP address in the address field of the web browser:
http://192.168.1.1
(The default LAN IP address for PePLink Balance is 192.168.1.1)
3. When prompted for User Name and Password to access the Web Administration
Interface, enter the following as User Name and Password to proceed.
User Name: admin
Password: admin
(The default admin password can be changed at the page System > Admin
Security of the Web Administration Interface.)
4. After successful login, the main page of Web Administration Interface is displayed:
Configuration changes (e.g. WAN, LAN, Admin settings, etc.) take effect after clicking the
Apply Changes button on each page’s header. The Apply Changes button causes the
changes to be saved and applied.
To Next Page
Loading...
