peplink Balance 30 - 5.3.4 Rear Panel Appearance; 5.3.5 Unit Label Appearance

PePLink Balance Series v4.0 User Manual
Page 13
5.3.4 Rear Panel Appearance
Connector Ports
USB Ports
Reserved for engineering use
Power Connector
AC input 110/220V
Switch
Power Switch
- To hold pressing the key for 4 secs will power down the unit
- When the unit is powered off, press it will power on the unit
5.3.5 Unit Label Appearance
USB Ports
Power Connector
Serial Number and
LAN MAC Address
Power Switch