PePLink Balance Series v4.0 User Manual
This table is for defining static routing rules for the LAN segment.
A static route consists of the network address, subnet mask, and
gateway address. The address and subnet mask values are in the
format of w.x.y.z
After entering a route, click the Down Arrow button to add it to the
routing table.
To remove an existing route, select the route from the list and click the
Delete button.
This field is to enable DNS caching on the built-in DNS proxy. When it
is enabled, queried DNS replies will be stored for the same requests
next time. This could improve the DNS lookup time. But it cannot
return the most updated result for those often-changed DNS records.
By default, it is disabled.
This table is for defining custom local DNS records.
A static local DNS record consists of a Host Name and an IP Address.
When looking up the Host Name from the LAN to LAN IP of PePLink
Balance, the corresponding IP Address will be returned.
After entering the corresponding values, click the Down Arrow button
to add it to the table.
To remove an existing local DNS record, select the record from the list
and click the Delete button.