peplink Balance 30 - 5.1.3 Rear Panel Appearance; 5.1.4 Connector Ports; 5.1.5 Unit Base Appearance

PePLink Balance Series v4.0 User Manual
Page 8
5.1.3 Rear Panel Appearance
5.1.4 Connector Ports
The connector ports on the rear panel are as follows:
Connector Ports
RS-232 Port
Reserved for engineering use
WAN Ports
Supports up to two 10/100BaseT WAN connections, typically
connected to broadband modems
LAN Ports
Supports up to four 10/100BaseT LAN connections, typically
connected to client PCs
Power Connector
DC 9V power input from supplied power adaptor
5.1.5 Unit Base Appearance
Power Connector
LAN Ports
WAN Ports
RS-232 Port
Serial Number and
LAN MAC Address
Mounting
Points
Mounting
Points