2
RCS P Climbing Protection Panel
Instructions for Assembly and Use - Standard Configuration
Overview
Main Components 1
Key 2
Presentational Reference 2
Introduction
Target Groups 3
Additional Technical Documentation 3
Intended Use 4
Instructions on Use 4
Cleaning and Maintenance Instructions 5
Safety Instructions
Cross-System 6
System-Specific 7
Storage and Transportation 7
Component Overview and Tool List 14
A General
A1 System Overview 16
A2 Climbing Device and Hydraulics 20
A3 Operating Status and Loads 23
A4 Operating Sequence 24
B Work Preparation
B1 Planning the Supporting Structure 28
System Dimensions 28
Framework Assembly 30
Additional Spacers 32
Additional Finishing Platforms 33
Reaction Forces 35
Suspension with the Slab Shoe 37
Suspension with the Slab Stopend Shoe 40
Horizontal Support 41
B2 Planning the Units 42
General 42
Attachment Point for the Crane 42
Planking 44
Girders 45
Protection against Falling
Objects 46
Guardrails 49
Enclosure 51
B3 Corner Platforms 52
General 52
External Corners 53
Internal Corners 59
Non Right-Angled Building Corners 60
B4 Special Applications 62
Units on Circular Structures 62
Anchoring on Columns or Walls 63
Anchoring on the Front Side of the Slab 64
C Assembly
C1 Pre-Assembly of Brackets 66
General 66
Preparation of the Climbing Rails 66
Assembly of the Attachment Points 69
Mounting the Climbing Rail Connector 71
Assembly of the Bracket Framework 72
Overview of the Bracket Framework 76
C2 Assembly of the Working Platforms 78
General 78
Mounting the Girders 78
Mounting the Platform Decking and
Toeboards 79
Foldable Cover 80
C3 Assembly of the Enclosure 84
Mounting the Timber Fixation 84
Mounting the Enclosure Beam 85
Mounting the Girder VT 20 86
Cover - Version 1 88
Mounting the Trapezoidal Metal Sheeting 89
Mounting the Protection Edges 90
Scaffold Tubes with Nets or Tarpaulins 91
C4 Suspension on the Structure 94
Attaching the Climbing Unit 94
Assembly of the Climbing Unit 95
Troubleshooting 100
D Utilisation
D1 Suspension and Anchoring 102
Mounting the Leading Anchor 102
Mounting the Stopend Slab Anchor 105
Assembly of the Suspension 106
Bracing the Corner Elements 110
Horizontal Support 112
Dismantling the Suspension 115
Removing the Anchoring 117
D2 Operating the Climbing Shoe 120
Opening / Closing the Climbing Shoe 120
Activating / Deactivating the
Climbing Pawl 122
D3 Moving by Crane 124
Safety Instructions 124
Preparations 125
Moving Procedure 126
Troubleshooting 127
Finishing Tasks 127
D4 Moving with the Climbing Device 128
Safety Instructions 128
Initial Operation of the
Climbing Hydraulics 129
Preparations 129
Hydraulic Diagram 129
Remedial Measures for Malfunctions 129
Moving Procedure
130
Self-Climbing Procedure 131
Finishing Tasks 137
E Dismantling
Removing the Climbing Enclosure 138
Dismantling the Climbing Enclosure 140
Components 142
Content
To Next Page
Loading...
