The hot surface warning labels (4) can be found on
the engine oil cooler.
Hot Fluid Under Pressure
Illustration 7 g01371640
Pressurized system! Hot coolant can cause seri-
ous burns, injury or death. To open the cooling
system filler cap, stop the engine and wait until
the cooling system components are cool. Loosen
the cooling system pressure cap slowly in order
to relieve the pressure. Read and understand the
Operation and Maintenance Manual before per-
forming any cooling system maintenance.
The hot fluids under pressure labels (5) have two
positions. One label is on the end cover of the oil
cooler. Perkins recommends that the other hot fluid
under pressure label is installed on the radiator, next
to the coolant filler cap.
Ether Warning
Illustration 8 g01372254
Do not use aerosol types of starting aids such as
ether. Such use could result in an explosion and
personal injury.
10 M0163009
Safety Section
Safety Messages
To Next Page
Loading...
