Chapter 3 TPD1317e
Page 18
Note: When tted, the bellows units should be in an unstrained condition so that the full bellows movement is
available to absorb expansion and engine movement.
Figure 8 - Dry Exhaust System Features - M92.
Bracket with link to allow for movement due to
expansion in the exhaust system (horizontal
exhaust systems should be suspended from the
deck head using similar brackets - rigid brackets
should not be used).
Insulating lagging
Rigid bracket to support the weight of the
vertical exhaust system
Flanges shown without
bolts for clarity
Heat blanket
90
O
Elbow
Connection
Heat blanket
Stainless steel belows
To Next Page
Loading...
