TPD1317e Chapter 3
Page 19
Bracket with link to allow for movement due to
expansion in the exhaust system (horizontal
exhaust systems should be suspended from the
deck head using similar brackets - rigid brackets
should not be used).
Insulating lagging
Rigid bracket to support the weight of the
vertical exhaust system
Flanges shown without
bolts for clarity
Heat blanket
90
O
Elbow
Stainless steel belows
Connection
Heat blanket
Figure 9 - Dry Exhaust System Features - M92B.
Note: When tted, the bellows units should be in an unstrained condition so that the full bellows movement is
available to absorb expansion and engine movement.
To Next Page
Loading...
