LUBRICANT SPECIFICATIONS
Pipe and Hose Clamps
Use the
following table for torque
specications to check pipe and hose
clamps.
Pipe and Hose Clamp Torque Values
APPLICATION
APPROVED CLAMP TORQUE
Nm Lb-In
Radiator and
Heat Exchanger Hoses
Constant-Torque CT-L
10.2-12.5 90-110
Heater Hoses
Constant Tension
not required not required
Air Intake
Pipes Hi-Torque HTM-L 11.3-14.2 100-125
Plastic Air
Intake Pipes
Constant- Torque CT-L
4.5
40 (maximum)
Charge Air
Intake Hoses Flex Seal 667
7.9-11.3 70-100
B9296 6-7 50-60
Fuel, Oil
& Water Heat Exchangers (for
hoses less than 9/16 diameter)
Miniature 3600L 1.1-1.7 10-15
5
5-36 Y53-6047–2C (04/13)
To Next Page
Loading...
