ELECTRICAL
Fuse Inspection and
Replacement
If a fuse is blown, see What to do if
fuse or
relay blows on page 2-6 for
more information.
Adding Electrical Options
WARNING!
CAUTION
Do not add a fuse with a rating higher
than 30 amps. Follow the circuit pro
-
tection size/type recommended by the
component manufacturer. Installing
a fuse or circuit breaker greater than
designated may damage the electrical
system which could lead to equipment
damage and/or personal injury.
Follow all manufacturers' circuit pro-
tection recommendations for the com-
ponents and wires being added. Fail-
ure to comply may result in equipment
damage.
5
Fuse Puller
(04/13) Y53-6047–2C 5-83
To Next Page
Loading...
