Peterbilt 579 - Component Identification

CONSUMER INFORMATION AND VEHICLE IDENTIFICATION
6
Paint Identication Label
The Paint
Identication Label contains
the paint colors used by the factory
to paint your vehicle. It lists frame,
wheels, cab interior and exterior
colors. This label is located inside the
glove box.
6-6
Federal Safety Standard
Certication Label
The NHTSA
regulations require a label
certifying compliance with Federal
Safety Standards, for United States
and U.S. Territories, be afxed to
each motor vehicle and prescribe
where such label may be located.
This certication label, which indicates
the date of manufacture and other
pertinent information, is located on
the driver’s side door edge or on the
driver’s side door frame.
Y53-6047–2C
Component Identication
Each of the major components on
your vehicle has an identication label
or tag. For easy reference, record
component numbers such as, model,
serial, and assembly number.
Engine: For
further information,
please refer to the Engine Operation
and Maintenance Manual.
Transmission:
For both manual
and automatic transmissions, the
identication number is stamped on a
tag afxed to the right rear side of the
transmission case.
Clutch: Enclosed
in clutch housing.
Location depends on manufacturer.
Steer Axle:
The front axle serial
number is stamped on a plate located
on the center of the axle beam.
Drive Axles:
The drive axle numbering
system includes three labels or stamps:
(04/13)