Peterbilt 579 - Master Lubrication Index

LUBRICANT SPECIFICATIONS
Master Lubrication
Index
Lubricant Symbol Key
ATF
MD3 or MERCON®-approved automatic transmission uid
BB
High temperature
ball bearing grease. Chevron SRI Mobile Grease HP, Texaco Multifax 2 or equivalent
CB Engine oil
for mild to moderate requirements
CC/CD Engine oil
for severe requirements (MIL-L-2104B /MIL-L-45199B w/ 1.85% max. sulfated ash content)
CD Engine oil
meeting API “Five engine test sequence”
CD50 SAE50W synthetic
transmission uid
CE Engine oil
meeting severe duty service requirements for direct-injection turbocharged engines
CJ-4 Engine oil
for PACCAR MX and Cummins EGR engines
CL
Multipurpose chassis
grease
EP
Extreme Pressure
Lubricant (Lithium 12-hydroxystearate base NGLI 2)
GL Straight mineral
gear lubricant
HD
Hypoid Gear
Oil, A.P.I. - GL-5, SAE 75W-90FE synthetic gear lubricant
HT
High Temperature
grease (Timken Spec. 0-616)
MP
Multipurpose gear
lubricant (MIL-L-2105B)
DOT3 or
DOT4
Brake Fluid
NOTE
The responsibility for meeting these
specications, the quality of the prod
-
uct, and its performance in service
rests with the lubricant supplier.
For oil reservoir with side ller plugs
(transmission, axles, steering gear
boxes, transfer
cases, etc.) the oil
must be
level with the ller opening.
Use care
when checking the oil level
with a
nger. Just because you can
reach the oil level with a nger, does
not mean the oil level is correct.
1 Improper Oil Level
2 Proper
Oil Level
5
(04/13) Y53-6047–2C 5-37