SEATS AND RESTRAINTS
1
Do not drive or ride with your seat back
in the reclined position. You could be
injured by sliding under the seat belts
in a collision. Failure to comply may
result in death or personal injury.
WARNING!
Lumbar (and bolster support if
available) are provided for superior
support to the back during operation.
Lower support is standard and the
optional functions include upper
lumbar and bolster functions. Pressing
on the “+” symbol of the button will
add support in the area. Pressing the
opposite side of the button will release
pressure and will reduce support in the
area.
1. Lower and Upper* lumbar adjustment
2. Bolster* adjustment
* This is
an optional feature and may vary
depending on the vehicle.
The seats in this vehicle are equipped
with a switch that locks out the fore-aft
isolator function in the seat. When
locked, the seat will not move back
and forth. It will be rigidly xed and
only allowed to move up and down
with the vehicle’s movements.
(04/13) Y53-6047–2C 1-21
To Next Page
Loading...
