Pfaff 421E1 - Page 67

Programming
11 - 30
Fig. 11 - 60
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
● If this function is not active, switch on the stitch counter (number key 1).
● Select the stitch counter function again to open the input menu.
● Enter the number of stitches (e. g. 5).
● Confirm the entry with the Enter key.
● Confirm the seam section end by pressing the Enter key.
● Switch off the program end function (number key 0).
● Confirm the first seam section by pressing the Enter key.
● Program the second seam section:
This seam section should have
- stitch counting (1 stitch)
- and a stitch length of 3.5 mm.
● Select the stitch length function (number key 4).
● Enter the stitch length.
1
Enter
Enter
Enter
5
3
# 1
NO. OF STITCHES 0
# 1
NO. OF STITCHES 5
# 2
NO. OF STITCHES 0
Fig. 11 - 58
Fig. 11 - 59