Pfaff 421E1 - Page 68

Programming
11 - 31
● Confirm the entry with the Enter key.
● Select the seam section end function (number key 9).
● If not active, switch the stitch counter on (number key 1).
● Select the stitch counter function again to open the input menu.
● Enter the number of stitches.
● Confirm the entry with the Enter key.
● Confirm the seam section end by pressing the Enter key.
● Confirm the second seam section by pressing the Enter key.
● Program the third seam section:
This seam section should have
- stitch counting (1 stitch)
- and a stitch length of 5 mm.
● Select the seam section end function (number key 9).
● Select the stitch counter function to open the input menu.
● Enter the number of stitches.
● Confirm the entry with the Enter key.
● Confirm the seam section end by pressing the Enter key.
● Select the stitch length function (number key 4).
● Enter the stitch length.
● Confirm with the Enter key.
● Confirm the third seam section by pressing the Enter key.
Enter
1
Enter
Enter
Enter
1
Enter
Enter
5
Enter
Enter