Programming
11 - 35
Enter
8
2
Enter
● Select the stitch length function (number key 1).
● Enter the stitch length.
● Confirm with the Enter key.
● Sew the second seam section manually.
● Switch on the pedal function (number key 2).
or:
● Bring the pedal backwards into the 2nd position.
The roller presser up after stop function is activated automatically.
● Switch on the thread trimmer function (number key 4).
● Select the program end function (number key 0).
● Confirm the programm by pressing the Enter key.
The thread trimming and/or the end bartack are not carried out until program
end function is activated (at the end of the program), or the Enter key (in every
other sector).
To Next Page
Loading...
