Description of the functions
Input mode
This function is used to change from the initial state to the input mode.
Sealing mode
This function is used to change to the sealing mode.
Data selection
With these functions the desired files are marked in the current drive. Individual files are se-
lected with the arrow keys. In combination with the Lock key (*) several files can be selected
at one time with the arrow keys.
Copy
This function is used to copy the files selected from the current data carrier onto the second
data carrier.
Delete
This function is used to delete the selected files.
MDAD/KONF
This function is used to call up the level for the configuration and machine data. The current
settings and the machine configuration are stored in the files "MDAT8310" and "KONF8310.
BIN". In this way the machine data can be copied on to a disk as a backup, or several machi-
nes with the same designation can be configured quickly by reading the machine data.
Format
This function is used to format the disk inserted.
In the course of the formatting operation, all data on the disk is deleted!
To Next Page
Loading...
